Business Savings Calculator
Switch and Save with Natural Gas
- Gas for Business
- Business Savings Calculator
- 1
STEP 1.
Your Business - 2
STEP 2.
Current Fuel Source and Equipment - 3
STEP 3.
Other Equipment - 4
STEP 4.
Personalized Savings
Step 1: Your Business
Please correct 0 errors in this section.
Please correct 0 errors in this section.
We're sorry, your zipcode is not serviced currently by UGI.
This helps us accurately analyze your estimated savings.
Please select the electric company that services your business.
Please select the electric utility company servicing the property. If the utility company is unknown, please choose a nearby company for purposes of estimating potential savings in your area.
Please input the square footage of the business.
Please enter a number between 1,000 and 100,000.
For estimates over 100,000, please contact your UGI Representative.
Square footage is a key factor in calculating your energy costs, so it is important to enter an accurate figure. If you are unsure of the square footage of your building, you can get a rough idea by measuring the length and width of the building. The Length × Width × Number of Floors will give a good estimate of building area in square feet.
Please select the insulation level of your business.
Good:
Building constructed or insulation upgraded in the past 15 years.
Average:
Building constructed 16-25 years ago and insulation not upgraded.
Poor:
Building constructed more than 25 years ago and insulation not upgraded.
Please select the number of operating Days.
This is the number of days the building sees 'typical' occupancy per week.
Please select the operating hours.
Operating hours include hours when the building is being used. For example, an office building is typically occupied from 7 AM to 6 PM (11 hours), a grocery store may be occupied from 5 AM to midnight (19 hours), and a convenience store may be occupied 24/7 (24 hours).
Please select an industry.
Step 2: Current Fuel Source and Equipment
Please select your primary source of fuel for heat.
Please select the age of your heating system.
Estimate the age of existing equipment. Currently operating equipment may be original to the building or may have been replaced. Checking the equipment for a nameplate may help show the year of installation.
Please select the efficiency of your heating system.
If your venting is PVC (Plastic), select high efficiency. If your venting is metal, select standard efficiency.
Please select the efficiency of the heater you plan to install.
Please select the efficiency of the water heater you plan to install.
Step 3: Other Equipment
Please enter the number of griddles in the building.
A griddle is a flat cooking surface usually on top of an oven but can also be stand-alone. A single griddle may have multiple heating elements, so list the number of unique equipment, not the number of heating elements. This only reflects commercial-grade electric griddles, not residential-type electric stove tops.
Please enter the nuber of electric ovens in the building.
Please enter the number of steamers in the building.
Please correct 0 errors in this section.
Step 4: Personalized Savings

Don’t worry about saving this page – we just sent you an email with all of the details!
Your potential
Annual Savings
Your potential
Equipment Lifetime Savings*
*Lifetime Savings is based on an equipment lifetime of 15 years.
Estimates are based on average costs in your zip code and comparable property sizes.
Actual savings may differ.
Plus, you'll save even more with our UGI Save Smart rebates. Find out more here.
Appliance | Current () | Natural Gas | Annual Savings | Five Year Savings |
---|---|---|---|---|
Space Heating | $0 | $0 | $0 | $0 |
Water Heating* | $0 | $0 | $0 | $0 |
Clothes Drying* | $0 | $0 | $0 | $0 |
Cooking* | $0 | $0 | $0 | $0 |
Gas Customer Charges | $0 | $0 | $0 | $0 |
Electric Customer Charges | $0 | $0 | $0 | $0 |
Total: | $0 | $0 | $0 | $0 |
*Calculations assume water heating, clothes drying and cooking are currently fueled by electric (or propane if you selected propane as your current heating source), as applicable. Costs to fuel those appliances by natural gas are included in the natural gas column.
By making the switch, your business
will save 0 lbs of carbon annually.
That's like planting 0 trees each year
* Carbon output estimate is based on full fuel cycle.
Business owners who invest in energy efficient equipment and appliances during or after their conversion could claim thousands in UGI Save Smart rebates.
Find out more here.